AR KIT:   This kit is designed to replace the ORIG. EQUIP. Rear Sight Leaf Assy. on The AR's,  SR's, and  M-16's.  The B JONES AR KIT Includes:  1  New Sight Leaf,  1  Hood w/ lens, 5  apertures, 1  socket tool, and assembly instructions.  The New Sight Leaf has the standard 1/2 minute thread for the windage screw  [#10X36 TPI] i.e. Colt, Bushmaster, RockRiver, Olympic,  and Armalite. The Upper Hole is   7/32" X 40  threads and the base of the leaf is an  .042" aperture, for those rainy days, just remove the Hood and 'flip' the leaf up. The Hood Assy.  is:  1  Hood,  1  lens,  1  0'ring,  and  1  lenscap.  The  4  apertures range  from  1 = .042" up to # 5 = .059" (THE .036" APERTURE IS NO LONGER INCLUDED IN THE AR-KIT ) The socket tool is  8  inches long to make aperture changing easy [(NOTE:  the apertures are placed on the Forward side of the threads of the Hood)] The Tool has a screwdriver blade on the opposite end to use in the "SLOT" on the threaded end of the Hood.  The Lens Cap is now a Hex Cap.. the same size as the Aperture Tool.
     This Rear Sight product has made it possible for the 'Older' Shooter to take up the AR 'Game' and  see the  Sight Picture well enough to compete and win on a National level.  When the 'Proper' power lens is used with the correct size aperture, the rewards are obvious immediately.  One Midwest Shooter recently reported  " My score didn't improve, but I didn't have a headache at the end of the day". He also stated  " I'm a High Master and I usually shoot a 197 average"  Others respond,  "Are you SURE this is legal?"  Yes,  " It's Legal " for every type of  Hi-Power Shooting except Inner-Marine Corps Competition .  Legal for NRA  Serv. Rifle, Match Rifle, Inter Service, and  THE CMP Competitions, ..Local, Regional and National Levels.

NOTE: TO PREVENT THE INVENTORY FROM GETTING OUT-OF-HAND, BJONES SIGHTS WILL NO LONGER EXCHANGE COLOR LENSES
 

B Jones Sights HAS a New AR Option available.  The New Option will be "Left-Hand Threads", for the Match Rifle Shooters who shy away from the AR's windage direction. The Option will be available in 1/2 minute windage and will turn the same direction as the windage knob on their bolt rifle. The "Screw and Leaf" will sell for $15.00 plus your requested shipping option. I will only offer this assembly with the #12 X 40 tpi, the thread for the B Jones Hoods.

     Due to requests from the Shooters, B Jones will offer a 1/4 minute Windage Leaf and Screw
as part of the AR Kit. The NEW "1/4 MIN. OPTION" will cost an additional  $10.00 .  The Screw and  Leaf will have  56 threads per inch. NOW IN STOCK - READY FOR DELIVERY !!

*Note: If you need Powers Other than those listed, contact B Jones for further details.
 

	To Add$10.00 1/4Min Option
	Select* POWER -.62-.50-.37-.25ZERO+.25+.37+.50+.62+.75 Select COLOR CLEARYELLOWROSEORANGEAMBERBLUEGREEN
(No Photo) Replacement Lenses $28.00 each *Note: If you need Powers Other than those listed, contact B Jones for further details.	Select* POWER -.62-.50-.37-.25ZERO+.25+.37+.50+.62+.75 Select COLOR CLEARYELLOWROSEORANGEAMBERBLUEGREEN
(No Photo) 1/4 Min. Leaf/Screw "Set" $25.00

 
 

The Threaded Base / Rear Sight Leaf  in the center is; ##10 X 36 TPI for 'windage' threads.
All this means is that the threads are the Industry Standard for the Windage Screw and you will re-use the original screw that comes with the rifle.

The New 1/4 min. Leaf  are the same specs as above description, except the Leaf and Screw
will have 56 TPI for those who want the USMC Match Threaded Rear Sight.

The Aluminum  Tool at the top is for removing the Hex-Caps.  The other end of the Aluminum Tool has a screwdriver blade to use when the Hood is being removed. Now shown in the upper right corner. This is the
Tool used to Torque the Hood-to-Leaf Threads when you use the Slot Provided on the Threaded part of the Hood.

The Hood Is in the top right corner : NOTE: The 1:00 area of the threads has a Notch,  This is the Notch you use to Loosen the torque of the Hood into the Base.

The Lens Cap is pictured in the lower right corner with the 0'ring.

Next, to remove the Lens, It's best to stick a needle into the '0-ring', Peel-Out the 0-ring then tap the Hood
gently. If this doesn't get the lens out, then remove the Hood and tap the Hood on a solid-flat surface. Be
sure to look into the Hood after each tap, to avoid hitting the removed lens with the edge of the Hood.

When you  re-install the lens, be sure that the high side of the  'Dome' will face the front sight, when the Hood is re-installed into the leaf.

                   #########################################################################

Compass Lake Eng./C.L.E./FrankWhite Bushmaster/Tippie Competition Rock-River, WhiteOak Hoods Select* POWER -.62-.50-.37-.25ZERO+.25+.37+.50+.62+.75 Select COLOR CLEARYELLOWROSEORANGEAMBERBLUEGREEN Please Note: You Will Be Sent A C.L.E.~KitUnless You Message B.Jones Sights bjonessights@yahoo.com NOTE If Your Hood Is Bumping Your Glasses, Send B.Jones a Message and Get a Longer 0-ring With Your Kit

Customer Comments:
Bob,
... I just tried the new AR Sight at a local 200 yd. range, and noted a vast difference in what I can now see. I handed the rifle to a friend of mine at the firing line, without saying what to look for. He was amazed and after numerous questions, he too, decided to 0rder a sight kit for his AR....
Michael... ...France

Return To Home Page
 

ShootersGunLinks	M-1 : M-1A : M-14
MATCH RIFLE : SMALL BORE	ASSORTED TANG SIGHT ACCY'S
TACTICAL and LAW ENFORCEMENT	COLOR  CHARTS
CHOOSING THE CORRECT POWER	CARBIDE CUTTER BLADE
H-K   Page	Redfield International Sight
DIGITAL CALIPERS	PNW REAR MATCH SIGHT
	LINKS N' THINGS

 
 
 

The Photo below shows the 'Side View' of the B Jones Hood
installed on an AR 15.If you look real close you'll see that the lens cap
is visible, but this should not effect your position or scratch your glasses.